The date offset for real time clock is not sent by the driver when EasyPlug extensions are used. Printer Installation Wizard will be able to automaticly remove all jobs when updating printer. Printer Install Wizard can start an application specified in the command line, after it closes.
Status monitor is able to detect port conflicts, when two printer drivers are using the same port for bidirectional communication with the printer. PrnInst didn't set printer attributes correctly. Uninstall of driver package failed when running a 64bti system. Labelling software can now recall variables with more than 31 characters of data. Help on About dialog opens help page with contents 'This program cannot display the webpage'. Maximum barcode height is limited to page height.
RLE Compressed graphics are no longer cut for optimization. When user starts Printer Install Wizard the application is shown but without focus. Changed default number for cutting to 1 label instead of 0. Rfid read and print functionality was disabled on avery rfid models. Added byte by byte read and print support for rfid functionality. Missing memory field parameter value when using Read and Print functionality. Default value for Always use default settings is not correct when instaling it the driver with a configuration file attached.
DLL files for user interface translation did not include version info data. Rfid Read and print does not work on Avery printers for Gen2 tags. Labels transfered from different systems now retain their driver settings. Increased lenght for filename and path in import and export of settings. Import and export didn't work if filename and path exceeded the length of 80 characters while windows support character lengths.
Click on "Stocks" panel caused error if stock list was empty. EndDocument escape was sent even when there was no StartDocument. Invalid stocks are now marked. User can open the Stock properties dialog and press OK to fix the problem which is usually stock dimension.
Stock size will be automatically adjusted. UI for commands fonts works now properly also in Japanese language. In some rare cases streams sent to the printer had an extra "0" added in it. Character widths for EasyPlug internal fonts corrected. Incorrect Croatian translation is used in the Advanced Setup dialog box for Punch offset.
Punched hole is media type with holes used to determine a new label. Added functionality so the user can Read and Store Rfid data. Added bidirectional communication with Avery printers. Added support for web-based printer management. Correct graphic position when printing from Windows applications.
Changed timestamp server to avoid "unknown certificate" issue on some OS systems. The driver was extensively tested with different NiceLabel software versions. We suggest that you verify existing labels and solutions before you start using this printer driver in production. The printer model supports bidirectional communication. Installation to USB port improved. No more "unknown" devices after printer installation. Label size is part of data when storing label template on new NX and S86ex printers.
When opening label file created with old printer driver version NiceLabel has crashed. Fixed issue with data being sent to printer when the printer is in error state. Merge from v5 to v7 driver is now working OK also for cutter parameters. Fixed preview for hour in labelling software when using printer clock variable timezone was not handled correctly.
When switching from printer model without media type option to the printer with media type, default driver setting is not used. Fixed issue with MicroPDF not being printed when version is set to automatic mode. When exporting label using XML export, label name in export file is different than in recall file.
Because of long translations part of command font dialog was missing. Simplified user interface and updated installation functionality in Printer Installation Wizard. Fixed problem with the pass through setting on the Barcode fonts dialog, when importing settings dialog created with previous versions.
Color of printing preferences dialog panel is also changed from black to blue. The data encoding is adjusted due to new parameter "Pass through mode" was supported..
Printer Install Wizard is now able to uninstall a driver on 32bit windows systems. Removed option to set number of retries for RFID write on tags that don't support it. Unit "system default" is no longer available as one of the possible measurement units on driver's GUI. Therefore all labels stored with "system default" unit will be opened with measurement unit set to cm.
Fixed issue with missing first character in text when using X23 and X24 fonts on HR2xx printer models. Fixed issue with unprintable area on labels made by version 5 drivers being positioned on the wrong side. Fixed issue with high graphics being cut into more then one image. Graphics are now cut only if they are over the size supported by printer. Incorrect value is retrieved during recall when there are elements with same variable contents. Unicode contents are now correctly handled in bar codes that support multiple code pages.
This option is supported also in the driver. When using multiple labels in a row the barcode HR is missing on second row of labels. The result is that just last stored layout is working OK. This is fixed now and graphic ID is dependent on format number which value is added to the original graphic ID. Graphics optimization was improved and combined with stripping empty space around graphics.
Cut every label functionality is now working as expected when using Crystal Report application. Fixed wrong syntax on MBi printers when using Configure Printer option. Fixed missing byte in command syntax on CTi printer when using Configure Printer option. Maximum label width for MBi fixed to dots. Minimum "Pitch offset" and "Dispense offset" are set to Removed "Dispenser" option from "Print operation mode". Auto power off is not read from printer printer language limitation.
No error when encoding RFID with locking enabled on some printers that do not support locking. XML export to internal memory and to memory cartridge was not working correctly. Menu with options "Send this parameter to printer" and "Let printer control this option" is no longer displayed on "Configure Printer" dialog box.
Stocks with to large page sizes were available to select on PW models. Fixed issue with batch cut commands appearing after each page in job if not using NiceLabel. Improved appearance of bitmap fonts sizes 16, 22, 24, 32,and 40 on screen to better represent printed results.
A click on the shielded button and entering the credentials is all that is needed. PrnInst can now be moved to any position second monitor and it will stay there. It will not jump back to its original position. When you click on the Help button in About dialog help is opened, but it is not linked to any page. Privacy settings. Experience cookies. Accept Reject. Analytical cookies. Marketing cookies. Close notification, I allow the use of my data for all the purposes listed above.
Close notification. Save this settings. What's new in Loftware NiceLabel 10 release? Learn more. Odpri menu. Monarch printer drivers Download drivers form To download printer drivers, enter your information and click download now button. You can program the RFID tags embedded into the smart label. Release notes Software latest release notes Release version Release description Ver. This is corrected now. This is fixed now. With this change the printout is faster without pause between labels.
Portuguese language is removed. Now it works OK. Printer reports an error Before correction the limitation was 51mm and printer with firmware older than Corrected PnP ID for models.
It is set to 99 now for TSPL printers. Shift size depends on page dimensions, shift direction depends on rotation. The label was cut and printed on wrong position too soon. X and Y offset can not be negative.
With this option the label won't back feed when it is cut off. Also when user will delete or install a new printer to the system, Status Monitor will detect the change by itself. Those options ware disabled before. This is improved now and it looks OK. Swiss font was the important one, because it was totaly wrong before. Supported printers Legend: Title Data Bidirectional The printer model supports bidirectional communication. NiceLabel driver can obtain the feedback of the printer status.
The status can be reported to and displayed in NiceLabel software. Release notes Software latest release notes Release version Release description Ver. Added support for web-based printer management.
Support Videojet Series. Driver is signed with updated certificate. Changed timestamp server to avoid "unknown certificate" issue on some OS systems.
Missing lenses were added for the printer model. Corrected date and time command for Videojet , and models. ProductDelay and ReverseProductDelay printer parameters were renamed on Videojet models: ,,, Added support for Videojet , and mm.
Improved location of "After each page" custom command on Clarity printers. Japanese fonts removed on models VJ and VJ Corrected encoding of variable names on Clarity protocol printers. Corrupt message error produced by using Unicode variable names is not longer issued. Corrected support for using graphics when job name includes Unicode characters on Clarity protocol printers. Updating variables now works when Unicode characters are used in the job name on Clarity protocol printers.
Corrected corrupt message error produced by incorrect encoding of variable names on Clarity protocol printers.
0コメント